Elphel offers the modified Elphel 353 camera that works with 12-36V DC for additional 50$. This modification is the key to enable mobile operation. The best efficiency range is said to be at around 15V.
Typical Elphel camera power consumption:
2400 milliwatts just booted
3000 milliwatts after setting image parameters
3700 milliwatts streamer on
3300 milliwatts streamer off
3800 milliwatts streamer on and somebody playing the stream
5000 milliwatts with streamer on and HD writing at full speed (dd)
5800 milliwatts streamer on, HD and USB-flash writing at full speed
If you are using an external HDD/SSD with the camera you have to provide power to this device as well. The best solution we have found so far is using an external 2.5" HDD enclosure with USB and eSATA. You can provide 5V power through USB and connect it to the camera with an eSATA to SATA adapter cable.
From our experience "general notebook backup-power batteries" also called " External Power Pack for Notebooks" work very reliable in the Apertus set-up
11.1V, 4400mAh, 48.8Wh
provides: 5V (USB connector), 16V, 19V
It has remaining capacity status LEDs, power on/off button and can be charged while being used.
When testing this battery pack we noticed a problem between the over-current (and maybe other protection circuits) detection of the Elphel camera and the Digipower battery pack which resulted in power being constantly cut and re-enabled at 16V. It worked flawlessly at 19V though.
XP8000 has a listed capacity of 8000mAh and the XP18000 of 18000 mAh (they fail to tell us at which Voltage though so we can't calculate Wh)
both provide 5V (USB) 1000 mA, 10.5V 2000mA, 19V 2000mA
Both have remaining capacity status LEDs, power on/off button, we did not try charging them while using them.
Price: XP8000 ~80$, XP18000 ~140$
We used the XP18000 one in the south Utah desert with an Elphel 353 and Intel SSD and had no bad experience with it. At the end of the day the battery was still 3 out of 4 status leds full.
The Tekkon myPower ALL comes in two flavours the 3450 version with a capacity of 50Wh and the industrial grade 3450i version with 58 Wh. Both are extendable with an addtional battery adding another 50Wh. Voltage can be selected via dip switch (3450i) ranging from 5V to 19V. The battery can be used while charging. The updated revision has now also an addtional 5V USB port that can be used simultaneously.
Price: ~140$ (3450) or ~200$ (3450i), Extenstion vattery: 100$
I used the Tekkeon 3450i plus extension battery extensivly troughout my recordings in the fields.
We did some tests with batteries actually meant to be used in RC-planes or -helicopters. LiPo batteries have the highest energy-density that is currently available, meaning for the same amount of power you need the least weight which is definitely desirable since the rest of the Apertus rig is extremely lightweight (e.g. camera: 230g). Though these batteries are also the most expensive ones and need some extra precaution as they posses the ability to light themselves on fire if not being handled properly.2000mAh LiPo using a Lipo saver LED (to avoid discharging the battery to below critical 9V)
In our tests everything went smoothly though, batteries powered Apertus flawlessly and there were no sudden combustions ;-)